Automatic Dosing

Initial Installation

Turn on the machine with On/Off button. Dosage symbol () appears in programs where detergent dosing is allowed. If the liquid detergent or softener compartments are empty, the dosage symbol will flash in programs where detergent dosing is allowed.

Filling Liquid Detergent and Softener

  1. Open the detergent compartment by pulling it towards yourself.
  2. To fill liquid detergent (left) and softener (right), open the related tank’s lid by pulling it upwards as shown in the picture.
  3. Remember not to exceed the “Max” sign when adding liquid detergent or softener.
  4. Close the lid of the compartment.
  5. Close the detergent drawer by pushing lightly.
  6. After closing the detergent drawer, the flashing dosage symbol () starts lighting up continuously.
  7. It indicates that the compartments are filled successfully and the detergent drawer is in its place.

We recommend filling the detergent compartment with liquid detergents that can be used in common for coloured and white laundry.

If the detergent symbol is flashing even though the detergent compartments are filled, the detergent drawer is not seated properly. Push the drawer so that it is fully seated.

WARNING

warning

WARNING

When the detergent drawer is filled with detergent and/or softener; do not pull or move the equipment, and do not tilt it on either side or back.

Before conducting these operations, the detergent drawer must always be removed from the machine.

If you wish to start the program while there is no detergent in the detergent drawer, liquid detergent dosage must be cancelled and washing with powder detergent is required.

Only liquid detergent must be put inside the liquid detergent dosing tank and only softener must be put in the softener dosing tank. Putting all kinds of liquid and powder chemicals together inside the tanks may damage your laundry or your machine.