Draining the remaining water and cleaning the pump filter.

The filter system in the product prevents solid materials such as buttons, coins, and fabric fibers from getting stuck in the pump impeller during the discharge of the washing water. This ensures that the wastewater is discharged smoothly and extends the lifespan of the pump.

If the product isn't draining the water inside, the pump filter may be clogged. The filter needs to be cleaned whenever it gets clogged, or every 3 months. To clean the pump filter, the water must first be drained.

Also, drain the water completely before moving the product (for example, when moving to another house).

WARNING

ANNOUNCEMENT:

Foreign objects trapped inside the pump filter can damage the product or cause noise problems.

In areas prone to freezing, turn off the water tap, disconnect the water hose, and empty the product when it is not in use.

Turn off the tap to which the product's water hose is connected after each use.

To clean the clogged filter and drain the water:

If the product does not have an emergency water drain hose, to drain the water:

• Place a large container in front of the filter to collect the water that will flow through it.
• Loosen the pump filter by turning it counterclockwise until water starts to flow. Collect the flowing water in the container you placed in front of the filter. Keep a cloth handy to clean up any spilled water.
• When the water in the product runs out, unscrew and completely remove the pump filter.