Unpacking and Transporting the Product

Unpacking the Product

Remove the cardboard box or Styrofoam packaging.
To remove the cardboard or Styrofoam packaging underneath the product, lift the product carefully. If this is not possible, remove it by tilting it slightly to the side or by laying it on its side without damaging the product.
Open the door and remove the inlet hose and any other accessories inside drum.
Detach the power cable and drain hose from their fixed positions.
Remove the transportation safety bolts. (see “Removing the Transportation Safety Bolts”)

Read the “Handling Safety” section first!

Ensure the door and detergent drawer are closed.
Install the transportation safety bolts carefully without damaging the product's drum. (see "Removing the Transportation Safety Bolts")
Pack the product with protective packaging to prevent damage during transport.