Water connection
- The product and, if applicable, the water pump must be unplugged before connection.
Your product's mains, filter, and water dispenser connections must be made by an authorized service technician.
Depending on the model, you can connect your product to a water dispenser or directly to the water supply. To make this connection, you first need to connect the water hose to the product.
Depending on your product model, check if the following parts are included with the product:
- Connector (1 piece): Used to attach the water hose to the back of the product.
- Hose clips (3 pieces): Used to secure the water hose to the wall.
- Water hose (1 piece, 5 meters, 1/4 inch diameter): Used for making water connections.
- Faucet adapter (1 piece): Used for connecting to the cold water supply line, with a porous filter.
- Water filter (1 piece *Optional): Used to connect the product to the mains water supply. If a water dispenser connection is already in place, a water filter is not necessary.
Connecting the water hose to the product.
Follow the instructions below to connect the water hose to the product.
- Remove the connector from the hose adapter that comes attached to the back of the product, and attach the connector to the water hose.
- Press the water hose firmly downwards to attach it to the hose-end adapter.
- Secure the fitting to the hose-end adapter by hand tightening it. You can use a pipe wrench or pliers to tighten the fitting.
Connecting to the mains water supply.
(This feature is optional)
If you intend to use the product by connecting it to the cold water line, you will need to install a standard 1/2” valve fitting into your home's cold water supply. If this fitting is not available, and you are unsure, consult a qualified plumber.
- Remove the connector from the tap adapter.
- Connect the faucet adapter to the mains valve.
- Insert the connector into the water hose.
- Insert the fitting into the tap adapter and tighten it by hand or with a tool.
- Secure the water hose in the appropriate places using the provided clips to prevent damage, slipping, or accidental dislodgement.
- After turning on the tap, ensure there are no water leaks at either connection point of the water hose. If a leak occurs, immediately close the valve and tighten all joints using a pipe wrench or pliers.
For products that will be used in water dispensers:
(This feature is optional)
To connect the product to a bottled water dispenser, a water pump recommended by an authorized service technician is required.
To connect the product to a bottled water dispenser, a water pump recommended by an authorized service technician is required.
- After connecting one end of the water hose from the pump to the product, follow the instructions below.
- Connect the water hose by pushing the other end of the hose into the water hose inlet of the pump.
- Secure the pump hose by inserting it inside the water bottle.
- After completing the connection, plug the pump into the power outlet and turn it on.
- After starting the pump, wait 2-3 minutes for it to reach the desired performance.
- When connecting the water supply, also refer to the pump's instruction manual.
- If a water dispenser is used, there is no need to use a water filter.
Water filter
Depending on the model, your product may have an external or internal filter. To install the water filter, follow the instructions below.
Wall mounting of the external filter
- Do not mount the filter on the product.
Depending on your product model, check if the following parts are included with the product:
- Connector (1 piece): Used to attach the water hose to the back of the product.
- Faucet adapter (1 piece): Used for connecting to the cold water supply line.
- Porous filter (1 piece)
- Hose clips (3 pieces): Used to secure the water hose to the wall.
- Filter mounting bracket (2 pieces): Used to mount the filter to the wall.
- Water filter (1 piece): Used to connect the product to the mains water supply. If there is a water dispenser connection, a water filter is not necessary.
- Connect the faucet adapter to the mains valve.
- Determine the location where the external filter will be fixed. Mount the filter mounting bracket ( 5 ) to the wall.
- Install the filter vertically into the filter mounting bracket as indicated on the label ( 6 ).
- Connect the water hose coming out of the top of the filter to the product's water connection adapter.
- Once the connection is complete, the image should look as shown below.
Since the product does not come with an integrated filter, the steps required to prepare it are outlined below:
Waterline:
Water bottle line:
- Do not use the first 10 glasses of water after connecting the filter.
- For filter installation: "Ice Off" The indicator must be active. The screen switches between ON and OFF indicators. Ice This is done by pressing the button.
- Remove the vegetable drawer to access the water filter.
- Remove the water filter bypass cover by pulling it towards you.
- It is normal for a few drops of water to come out after the lid is removed.
- Place the water filter cover into the mechanism and push it forward to lock it in place.
- On the screen "Ice" By pressing the button again, "Ice Off" Exit this mode.
- Water filters remove some foreign particles from the water. They do not remove microorganisms from the water.