Control Panel of the Product

Read the “Safety Instructions” first!

The audio and visual functions on the instrument panel help you use the product.

*Optional: The functions shown are optional, the functions on the display panel of your product may differ in terms of shape and location.

Quick Freeze Button

When the quick freeze button is pressed, the LED above the button lights up and the quick freeze function is activated. The freezer compartment temperature is set to -27 degrees Celsius. To cancel the function, the button must be pressed again. The quick freeze function cancels itself automatically. If you want to freeze a large quantity of fresh food, press the quick freeze button before placing the food in the freezer compartment.

Ice Maker On/Off Button

Pressing this button for 3 seconds activates ice making and the LED on it will light up. Pressing the button again for 3 seconds deactivates ice making; however, previously made ice can still be used even if the function is deactivated.

Error Status Indicator

This indicator will activate when your product is not cooling adequately or when a sensor error occurs. The letter “E” will appear on the freezer compartment temperature display, and numbers such as 1, 2, 3, etc. will appear on the refrigerator compartment temperature display.

These numbers on the display inform the service about the error that has occurred.

When you load hot food into the freezer compartment or leave the door open for an extended period, an exclamation point may illuminate temporarily. This is not a malfunction; the warning will clear when the food cools or any button is pressed.

Refrigerator Compartment Shutdown (Holiday) Function Button

Press the button for 3 seconds to activate the vacation function.

Holiday mode is activated and the LED on the button illuminates. The refrigerator compartment temperature display shows “- -“ and the refrigerator compartment is not actively cooling. It is not advisable to keep food in the refrigerator compartment while this function is activated. The other compartments continue to cool according to their set temperatures. To cancel this function, press the button again for 3 seconds.

Quick Cooling Button

When the quick cooling button is pressed, the LED above the button lights up and the quick cooling function is activated. The refrigerator compartment temperature is set to 1 Celsius. To cancel the function, the button must be pressed again. The quick freezing function automatically cancels itself when cooling is complete.

Refrigerator Compartment Temperature Adjustment Button

The temperature for the refrigerator compartment is adjusted. When the button is pressed, the refrigerator compartment temperature can be set to 8, 7, 6, 5, 4, 3, 2, and 1 Celsius.

Odor Eliminator Module Key

To activate/deactivate the odor removal feature, press and hold this button for 3 seconds. The LED on the button will light up when the odor removal feature is active. The odor removal module will operate periodically while the feature is active.

Filter Change Warning Button

The product's water inlet filter should be replaced at regular intervals. Your product automatically calculates this time. When the filter's lifespan is over, the LED on the filter replacement warning button will light up. After replacing the filter, press and hold the button for 3 seconds to turn off the filter replacement warning LED.

Water, Ice Cubes, Crushed Ice Selection Key +{10}+

This button allows you to switch between water, ice cubes, and crushed ice options. The icon you activate will remain lit.

Wireless Button

This button is used to connect your device wirelessly via the HomeWhiz mobile application.

When the button is pressed and held (for 3 seconds), the LED on the button will blink slowly (at 0.5-second intervals). This initiates the initial setup of the home network with the product.

Once a wireless connection is established with the product, the LED on the button will remain constantly lit.

After the initial setup is complete, pressing this button can activate/deactivate the connection. The LED on the button will blink rapidly (at 0.2-second intervals) until a connection is established. Once the connection is active, the LED will remain lit.

If the connection is not established for a long time, check your connection settings and refer to the 'Troubleshooting' section in the user manual.

The HomeWhiz app is required for wireless connectivity. Setup steps are explained via the app during installation. You can access the app by scanning the QR code on the HomeWhiz label on the product. The app is available on the App Store for iOS devices and the Play Store for Android devices.

For detailed information, https://www.homewhiz.com/ Visit this address.

Freezer Compartment Temperature Adjustment Button

The temperature for the freezer compartment is adjusted. When the button is pressed, the freezer compartment temperature can be set to -16, -17, -18, -19, -20, -21, -22 Celsius.