Control Panel of the Product

Read the “Safety Instructions” first!

The audio and visual functions on the instrument panel help you use the product.

*Optional: The functions shown are optional, the functions on the display panel of your product may differ in terms of shape and location.

1.*Ice Maker On/Off Button

Pressing this button for 3 seconds activates ice making and the LED on it will light up. Pressing the button again for 3 seconds deactivates ice making; however, previously made ice can still be used even if the function is deactivated.

2. Error Status Indicator

This indicator will be active when the refrigerator is not cooling sufficiently or a sensor error occurs. The letter "E" will appear on the freezer compartment temperature indicator, and numbers such as 1, 2, and 3 will appear on the refrigerator compartment temperature indicator.

These numbers on the display inform the service about the error that has occurred.

When you load hot food into the freezer compartment or leave the door open for an extended period, an exclamation point may illuminate temporarily. This is not a malfunction; the warning will clear when the food cools or any button is pressed.

3. Refrigerator Compartment Shutdown (Holiday) Button

Press the button for 3 seconds to activate the vacation function.

Press the button for 3 seconds to activate the holiday function. Holiday mode will be activated and the LED on the button will light up. The refrigerator compartment temperature display will show “- -“ and the refrigerator compartment will not be actively cooling. It is not advisable to keep food in the refrigerator compartment while this function is activated. The other compartments will continue to cool according to their set temperatures. To deactivate this function, press the button again for 3 seconds.

4. Product Shutdown Button

Pressing this button for 3 seconds switches the product to off mode. In off mode, the LED on the button illuminates, and the refrigerator does not perform any cooling operation. Pressing the button again for 3 seconds will return the refrigerator to normal operation, and the LED will turn off.

5. Refrigerator Compartment Temperature Adjustment Button

The temperature setting for the refrigerator compartment is made. By pressing the button, the refrigerator compartment temperature can be set to 8, 7, 6, 5, 4, 3, 2 and 1 °C.

6. Filter Reset Button

The refrigerator's water inlet filter should be replaced at regular intervals. Your refrigerator automatically calculates this time. When the filter's lifespan is over, the LED on the filter replacement warning button will light up. After replacing the filter, press and hold the button for 3 seconds to turn off the filter replacement warning LED.

7. Ice Cube Selection Button

This button allows the user to switch to ice pop mode. Each short press of the button illuminates either the Crescent ({93}) or Crushed () icon, cycling through the ice pop options. The LED on the ice pop button also lights up when pressed. Additionally, holding this button down for 3 seconds can turn off the trigger light.

8. Crushed Ice Icon

The corresponding icon lights up when the ice cube selection is set to crushed.

9. Ice Cube (Crescent) Icon

The corresponding icon lights up when the ice cube selection is set to cube.

10. Water Selection Icon

The corresponding icon lights up when the water intake process is active.

11. Water Selection Button

This button activates the water dispensing process via the trigger. When pressed, the LED on the button and the Water Selection Icon light up. Once the user selects this mode, water flow continues as long as the trigger is held down. The Water Selection button also allows adjustment of the water volume. A short press of the button cycles through 1/4 L, 1/2 L, 1 L, and CST (Custom) options. The selected water volume is displayed in the Temperature Selection Indicator area on the screen. When the user selects the CST option, if they press and hold this button for 3 seconds while CST is displayed on the screen, the CST indicator will start flashing. In this case, the user can press the trigger to dispense the desired amount of water. When the water dispensing process is complete, CST will flash again on the screen, and the dispensed water volume will be saved as the Custom value.

From now on, with the Custom option active, each time the trigger is pulled, the user will receive a pre-set amount of water.

12. Wireless Button

This button is used to establish a wireless connection to your product via the HomeWhiz mobile application. Pressing and holding the button (for 3 seconds) will cause the LED on the button to blink slowly (at 0.5-second intervals). This initiates the initial setup of the home network with the product. Once a wireless connection is established, the LED on the button will remain lit. After the initial setup is complete, pressing this button again can activate/deactivate the connection. Until a connection is established, the LED on the button will blink rapidly (at 0.2-second intervals). When the connection is active, the LED will remain lit. If a connection cannot be established for an extended period, check your connection settings and refer to the 'Troubleshooting' section in the user manual.

The HomeWhiz app is required for wireless connectivity. Setup steps are explained via the app during installation. You can access the app by scanning the QR code on the HomeWhiz label on the product. The app is available on the App Store for iOS devices and the Play Store for Android devices. For more information, visit https://www.homewhiz.com/.

*Wireless Connection Settings Reset Key {100}+

To reset wireless connection settings, use Quick Freeze () and Wireless connection.

The keys () must be pressed simultaneously for 3 seconds.

When wireless settings are reset/restored to factory defaults, all user information previously used for setup is forgotten on the product.

*Celsius/Fahrenheit Conversion +

Pressing the Refrigerator Compartment Temperature Adjustment Button () and the Refrigerator Compartment Shutdown (Holiday) () button simultaneously for 3 seconds will switch the temperature display between Celsius and Fahrenheit.

*Sabbath Mode {106}+

To activate/deactivate Sabbath mode, press the Freezer Compartment Temperature Setting Button () and the Quick Freeze () button simultaneously for 3 seconds. When Sabbath mode is activated, the display buttons, door opening alarm, or lights will not function.

13. Freezer Compartment Temperature Adjustment Button

The temperature setting for the freezer compartment is made. By pressing the button, the freezer compartment temperature can be set to -18, -19, -20, -21, -22, -23, -24 Celsius.

14. Quick Freeze Button

When the quick freeze button is pressed, the LED above the button lights up and the quick freeze function is activated. The freezer compartment temperature is set to -27 degrees Celsius. To cancel the function, the button must be pressed again. The quick freeze function automatically cancels itself after 24 hours. If you want to freeze a large quantity of fresh food, press the quick freeze button before placing the food in the freezer compartment.