The ice storage area

Ice/Water Taking

Select the related option by using the display in order to take water () / ice cube ( ) / crushed ice (). Push forward the trigger on the water dispenser in order to take water/ice. When you switch between ice cube ( ) / crushed ice () options, ice type remaining from the previous selection can be given in the first few takings.

• In order to take ice from ice / water dispenser for the first time, you have to wait approximately for 12 hours. In the event that there is not sufficient ice in the ice container, you cannot take ice from the dispenser.
• Do not consume the ice cubes (3-4 litres) after first running.
• If a power failure or temporary malfunction arises while the product is running, ices may melt a little and refreeze. In this case, ices may stick to each other. In the event that the power failure or the malfunction goes on, ices may melt and cause a water leakage. When such a problem exists, clean the ice container by pouring the ices left in the ice container.
• The water system of the product should only be connected to cold water line. It should not be connected to the hot water line.
• Water may not be taken during the first operation of the product. This is because there is air in the system. You have to discharge the air in the system. For this purpose, press on the trigger of the dispenser for 1-2 minutes until the water comes from the water dispenser. At the beginning, the water flow may be irregular. Water flow will return to normal after the air in the system is discharged.
• A blurry water may come out when the filter is used for the first time. The first 10 glasses of water should not be consumed.
• When the product is set up for the first time, approximately 12 hours should be passed for the water to cool.
• The water system of the product has been designed in a way that it can only work with clean water. Do not use any beverage except water.
• If you will not use the product for a long time for the reasons of vacation etc., we recommend you to cancel the water connection. When the water dispenser is not used for a long time, the first 1-2 glasses of water may come out hot.

Drip tray

The water dripping from the water dispenser accumulates on the drip tray, there is not a water outlet. You can take out the drip tray by pulling it toward yourself or pressing on its edge. You can clean the water in the drip tray in this way.

Ice Machine

Ice machine is on the upper section of the freezer body.

By grabbing the handle under the front part, pull the ice storage bin towards yourself to remove.

To remove the ice storage bin

Grab the handle on the bottom of the bin and pull it towards yourself.

To reinstall the ice storage bin

Put the bin to its slot and push it back holding parallel to the ground. Please make sure that no space will be left between the bin and the ice maker compartment.

In case you cannot get all the ice cubes produced

Ice cubes remaining in the storage bin for a long time may stick together and form large ice blocks. In this case, remove the ice storage bin as described in the manual, separate ice cubes, remove the ones that cannot be separated from the bin and put the remaining cubes back into the bin.

If the problem persists, please check the ice channel, and clear if it is blocked.

When using the ice machine for the first time or after a long period

Ice cubes may get smaller due to the residual air in the water system. The air will be automatically discharged after being used for some time.

• Do not use the ice cubes produced on the first day so that you can refresh all remaining water in the system.
• Do not insert your hand or any other object into the ice channel and ice crushing blades while the refrigerator is operating.
• Do not allow kids to hang onto the ice machine, ice storage bin or water/ice dispenser.
• Grasp the ice storage bin firmly with both hands so as not to drop it.
• When you close the door of your appliance fast, the water in the ice maker may splash into the ice storage bin.
• Do not disassemble the ice storage bin unless necessary.
• In case of a jam (appliance does not drop ice) while getting crushed ice, try getting ice cube.
• Then you can retry getting crushed ice.
• When getting crushed ice, the appliance may produce ice cubes first. It is possible for the appliance to produce ice cubes when getting crushed ice.
• The freezer door of the ice machine may be covered by a light frost and a film layer.
• This is normal and we recommend you to immediately clean it.
• After some time, water may fill in the grid which is at the bottom of the water dispenser.
• We recommend you to remove the water in the grid regularly.
• It is normal to hear a sound when ice cubes are falling down from the ice storage bin. This does not mean any malfunction.
• The blade mechanism of the ice bin is sharp and may injure your hand.
• If ice cubes aren’t released from the ice dispenser, it means that the ice cubes may be stuck together. You need to clean the bin to continue to get ice cubes.
• When the trigger is pressed to get ice (Indicator etc.), ice type cannot be changed. You should release the trigger (Indicator etc.), change the ice type and take ice again. For this purpose, you can take ice again after changing the ice type on the indicator.