The ice storage area

Twist Icematic

Take the water tank out of its housing by turning it to the left.

Twist open the water tank cover and fill the water tank with water up to the bottom level of water tank cover.

Put the water tank in its place by inserting and turning it in the direction of the arrow as it is shown below after filling with the water. The water will be poured into ice tank.

After the ice is formed, turn the ice tank knob in the direction of the arrow and ensure that the ice cubes are poured into the ice drawer.

Take the ice cubes by drawing the ice drawer.

In order to wash the ice tank, pull the front part towards yourself and push it into its place by fixing it into slideways in the internal part to attach it again.

In order to take Twist icematic unit out, pull it towards yourself and push it into its place by fixing it into slideways on the ceiling to attach it again.

Ice Machine

Ice machine allows you take ice easily from the refrigerator.

Using the ice machine

1. Remove the water tank in the cooler compartment.
2. Fill the water tank with water.
3. Place the water tank back. First ice will be ready in about 4 hours in the ice maker drawer in the freezer compartment. 

• A sound may be made during ice pouring. This sound is normal.
• You may obtain about 60-70 cubes of ice when the water tank is full.
• Water inside the water tank shall be replaced within 2-3 weeks at most.