Electrical Safety

• The product shall not be plugged into the outlet during installation, maintenance, cleaning, repair, and transportation operations.

• Do not tuck the power cable under the product or to the rear of the product. Do not put heavy items on the power cable. The power cable should not be bent, crushed, and come into contact with any heat source.
• Use an original cable only. Do not use cut or damaged cables.
• Do not use an extension cord, multi-plug or adaptor to operate your product.
• Portable multi-plugs or portable power supplies may overheat and cause fire. Thus, do not have a multi-plug, portable power sources behind or in the vicinity of the product.
• Before plugging the product into the power source, please remove the power cable from the condenser hook (if available) during the installation.
• The user should not be able to reach the electrical parts after installation.
• Do not plug the product’s power cord in a loose or damaged power outlet. These types of connections may overheat and cause fire.
• The plug shall be easily accessible. If this is not possible, a mechanism that meets the electrical legislation and that disconnects all terminals from the mains (fuse, switch, main switch, etc.) shall be available on the electrical installation.
• The product must not be operated with an external switching device such as a timer, or a remote controlled system.
• Do not use the product when your feet are bare or your body is wet.
• Do not touch the plug with wet hands.
• When unplugging the appliance, don’t hold the power cable, but the plug.
• Make sure that the plug is not wet, dirty or dusty.
• Do not ever connect your product to power saving devices. These systems are harmful for the product.