Oven operating functions
On the function table, the operating functions you can use in your oven and the highest and lowest temperatures that can be set for these functions are shown. The order of the operating modes shown here may differ from the arrangement on your product.
Function symbol | Function description | Temperature range (°C) | Description and use |
| Oven lamp | - | No heater works in the oven. Only the oven lamp lights up. |
| Operating with fan | - | The oven is not heated. Only the fan (on the back wall) operates. Frozen food with granules is slowly defrosted at room temperature, cooked food is cooled. The time required to defrost a whole piece of meat is longer than for foods with grains. |
| Top and bottom heating | 40-280 | Food is heated from above and below at the same time. Suitable for cakes, pastries or cakes and stews in baking moulds. Cooking is done with a single tray. |
| Bottom heating | 40-220 | Only lower heating is on. It is suitable for foods that need browning on the bottom. This function should also be used for easy steam cleaning. |
| Fan assisted bottom/top heating | 40-280 | The hot air heated by the upper and lower heaters is distributed equally and rapidly throughout the oven with the fan. Cooking is done with a single tray. |
| Fan Heating | 40-280 | The hot air heated by the fan heater is distributed equally and rapidly throughout the oven with the fan. It is suitable for multi-tray cooking at different shelf levels. |
| Eco fan heating | 160-220 | In order to save energy, you can use this function instead of using “Fan Heating” in the range of 160-220°C. But; cooking time will be slightly longer. |
| "3D" function | 40-280 | Upper heating, lower heating and fan heating functions operate. Each side of the product to be cooked is cooked equally and quickly. Cooking is done with a single tray. |
| Full grill | 40-280 | The large grill on the oven ceiling works. It is suitable for grilling in large amounts. |
| Pyrolysis | - | It is used for self-cleaning of the oven at high temperature. Look at the specifications in the maintenance and cleaning section for this function. |
